12V 80W LED waterproof transformer

80W LED waterproof transformer ~Waterproof ~DC12V 6.67A 80W ~1 years warranty ~CE and RoHS

12V 80W LED waterproof transformer

Features :

IP67 design for indoor or outdoor installationsProtections: Short circuit / Overload/Over temperatureCooling by free air convection100% full load burn-in testSuitable for LED lightingProducts through CE, RoHS Certification1 years warranty

SPECIFICATION
MODEL		12V80W	24V80W
	DC VOLTAGE	12V	24V
	RATED CURRENT	6.7A	3.3A
	CURRENT RANGE	0~6.7A	0~3.3A
	RATED POWER	80W	80W
	NOTE.2	150mV	150mV
OUTPUT	RIPPLE & NOISE (max.)
	NOTE.3	±4%	±2%
	VOLTAGE TOLERANCE
	SETUP, RISE TIME	80ms/220VAC
	HOLD UP TIME (Typ.)	60ms/220VAC
	VOLTAGE RANGE	170 ~ 250VAC
	FREQUENCY RANGE	50 ~ 60Hz
	POWER FACTOR (Typ.)	PF>0.6/220VAC
INPUT	EFFICIENCY (Typ.)	77%	80%
	AC CURRENT (Typ.)	0.57A/220VAC
	INRUSH CURRENT (Typ.)	COLD START 40A/220VAC
	Short circuit	Protection type :  recovers automatically after fault condition is removed
	Overload	overload protected @ 145-160% above peak rating
PROTECTION	Over temperature	Protection type : Shut down o/p voltage, re-power on to recover
	WORKING TEMP.	-30 ~ +50°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 99% RH non-condensing(Waterproof)
ENVIRONMENT	STORAGE TEMP., HUMID IT Y	-40 ~ +80°C , 10 ~ 99% RH
	SAFETY STANDARDS	CE  Mark (LVD)  ,  IP67
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC   I/P-GND:1.5KVAC
SAFETY & EMC
	EMC Test Standards	EN55015:2006 ; EN61547:1995+A1:2000 ; EN61000-3-2:2006 ;
		EN61000-3-3:1995+A2:2005 ; EN61347-1:2001 ; EN61347-2-13:2006
	1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 1 0 uf parallel capacitor.
NOTE
	3. Tolerance : includes set up tolerance, line regulation and load regulation.

12V 80W LED waterproof transformer