Shenzhen Shunyingwanda Tech Development Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. sun Simon
  • Company Name : Shenzhen Shunyingwanda Tech Development Co., Ltd.
  • Tel : 86-755-27363668
  • Fax : 86-755-29580551
  • Address : Guangdong,Shenzhen,9F zixinda Builing,No.1053 Baoyuna Road, xixiang town, Bao'an District,
  • Country/Region : China
  • Zip : 518102

24V 90W LED waterproof transformer

24V 90W LED waterproof transformer
Product Detailed
Related Categories:AC/DC Adapters
24V 90W LED waterproof transformer ~Waterproof ~DC24V 3.75A 90W ~1 years warranty ~CE and RoHS

24V 90W LED waterproof transformer

Features :

IP67 design for indoor or outdoor installationsProtections: Short circuit / Overload/Over temperatureCooling by free air convection100% full load burn-in testSuitable for LED lightingProducts through CE, RoHS Certification1 years warranty

SPECIFICATION
      
MODEL12V90W24V90W   
 DC VOLTAGE12V24V   
 RATED CURRENT7.5A3.75A   
 CURRENT RANGE0~7.5A0~3.75A   
 RATED POWER90W90W   
 NOTE.2150mV150mV   
OUTPUTRIPPLE & NOISE (max.)   
 NOTE.3±4%±2%   
 VOLTAGE TOLERANCE   
 SETUP, RISE TIME80ms/220VAC
 HOLD UP TIME (Typ.)60ms/220VAC
 VOLTAGE RANGE170 ~ 250VAC
 FREQUENCY RANGE50 ~ 60Hz
 POWER FACTOR (Typ.)PF>0.6/220VAC
INPUTEFFICIENCY (Typ.)77%80%   
 AC CURRENT (Typ.)0.57A/220VAC
 INRUSH CURRENT (Typ.)COLD START 40A/220VAC
 Short circuitProtection type :  recovers automatically after fault condition is removed
 Overloadoverload protected @ 145-160% above peak rating
PROTECTIONOver temperatureProtection type : Shut down o/p voltage, re-power on to recover
 WORKING TEMP.-30 ~ +50°C (Refer to output load derating curve)
 WORKING HUMIDITY20 ~ 99% RH non-condensing(Waterproof)
ENVIRONMENTSTORAGE TEMP., HUMID IT Y-40 ~ +80°C , 10 ~ 99% RH
 SAFETY STANDARDSCE  Mark (LVD)  ,  IP67
 WITHSTAND VOLTAGEI/P-O/P:1.5KVAC   I/P-GND:1.5KVAC
SAFETY & EMC  
 EMC Test StandardsEN55015:2006 ; EN61547:1995+A1:2000 ; EN61000-3-2:2006 ;
  EN61000-3-3:1995+A2:2005 ; EN61347-1:2001 ; EN61347-2-13:2006
  
 1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature.
  
 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 1 0 uf parallel capacitor.
NOTE 
 3. Tolerance : includes set up tolerance, line regulation and load regulation.

24V 90W LED waterproof transformer



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.